CHORD
CHORD(코드) CPA 5000 + SPM 1400 MK. II 프리 모노파워
상품코드 1804030002
정상가 50,500,000원
판매가격 48,000,000원
적립금 480,000원
제조사 CHORD
원산지 England
주문수량

EA
chord.jpg
B1.jpg

The CPA 5000 is one of two ultra-high-performance models in the flagship Reference range, representing our finest preamp engineering. The CPA 5000 offers a substantially larger chassis than our Standard Series preamps and contains the latest proprietary ultra-high-frequency power supply. When combined with our ultra-low-noise circuitry, the technologies give the CPA 5000 an incredible noise floor performance of below -130dB.

The CPA 5000 is highly flexible, too. It offers four pairs of fully balanced inputs, four pairs unbalanced inputs, plus two completely independent tape/recording loops. Each input has six levels of gain that can be individually selected to prevent large changes in volume when switching between inputs and all settings are stored via a microprocessor, even if power is removed. The CPA 5000 also includes two low-distortion, low-noise front panel headphone outputs to exploit the full potential of today’s high-quality headphones and give added flexibility for late-night or personal listening.

Also included, is fully balanced A/V bypass circuitry for direct connection to A/V processors, 12V remote triggering outputs at the rear of the unit to activate power amplifiers or A/V processors on power-up, plus Chord’s legendary aircraft-grade solid alumi

B2.jpg
B3.jpg


Frequency Range:

2.5Hz – 200kHz +/- 3dB

Total Harmonic Distortion:

0.002% 20Hz – 20kHz

Intermodulation Distortion:

-120dB on all inputs

Signal to Noise Ratio:

-120dB on all inputs

Channel Separation:

20Hz @ 100dB, 1kHz @ 95dB, 10kHz @ 90dB, 20kHz @ 85dB

Channel Balance:

0.01dB

Input Max Voltage:

17v RMS Balanced – 8.5v RMS Unbalanced

Output Max Voltage:

17v RMS Balanced – 8.5v RMS Unbalanced

Output Offset:

0mV (Both Channels)

Potentiometer Performance:

0dB 0.5dB, -20dB 0.2dB, -60dB 0.24dB (13seconds Full Travel)

Nominal Gain:

All inputs subject to six levels of switchable gain – x0.5, x1, x1.5, x2, x2.5, and x3

Input Impedance:

100 kΩ Balanced – 50 kΩ Unbalanced

Output Impedance:

100Ω (Short Circuit Protected)

Operating Voltage:

85v – 270v AC (50Hz – 60Hz) Auto Switching

Power Consumption:

30w

Dimensions Without Integra Legs:

420mm (w) x 355mm (d) x 133mm (h)

Dimensions With Included Integra Legs:

480mm (w) x 355mm (d) x 173mm (h)

Weight:

18kG




C1.jpg

With Chord Electronics Limited’s considerable experience in the design and manufacture of the world’s best consumer and professional amplifiers, we are proud to announce our latest design of power amplifier utilising our high frequency power supply techniques and our own proprietary lateral structure dual-die MOSFETs. This amplifier provides all the benefits of mono amplification whilst retaining all of the much loved qualities of Chord Electronics amplifiers. Improvements in capacitor technology have boosted secondary reservoir levels to 94,000 µF storing over 381 Joules of energy. A “Superamp” in all but dimensions, this amplifier is for those whose goal is direct comparison between live and recorded music, a sentiment echoed by reviewer and customers alike.

Hi-Fi News magazine recently praised the latest-generation SPM 1400MkII mono power amp in its September 2013 edition. The issue features an in-depth review of our new mono power amp and sums up by saying: “Beautiful to behold by both eye and ear, Chord’s MkII SPM 1400 monoblocks offer spectacular insight into music. Majoring on clarity, timing and delivering natural realism like few other power amps at any price, they tick every box in the audiophile hi-fi check list. Neutral, detailed and with breathtaking resolution.” Hi-Fi News gave the ‘1400MkII their ‘Highly Commended’ award. You can download the full review below.

A high current mains filter ensures that the amplifier is shielded from disturbed mains as well as ensuring that the mains is untouched by emissions from the amplifier. The output from the power supply uses a truly innovative “Dynamic Coupling” technique whereby the positive and negative rails are mutually coupled by a strong magnetic flux. The result being that if a high demand is put on one rail, the energy required is actually drawn equally from both rails. This keeps the amplifier balanced dynamically and the reference point perfectly clean.


C2.jpg




Output Power:

480w RMS per channel @ 0.05% distortion into 8Ω

800w RMS per channel into 4Ω

Frequency Response:

-1dB @ 0.2Hz to 46kHz and -3dB 0.1Hz to 77kHz

Signal to Noise Ratio:

Better than -103dB

Channel Separation:

Better than 90dB

Input Impedance:

100kΩ Unbalanced/Balanced

Output Impedance:

0.04Ω

Gain:

30dB

Dimensions Without Integra Legs:

420mm (w) x 355mm (d) x 150mm (h)

Dimensions With Included Integra Legs:

480mm (w) x 355mm (d) x 190mm (h)

Weight:

24kg



  • 등록된 게시물이 없습니다.

  • 등록된 게시물이 없습니다.

번호 사진 제목 작성자 작성일 조회수
1 [오디오 뉴스]
CHORD(코드) 신형 프리, 파워 앰프 CPA 5000 + SPM 1400 MK. II 입고
관리자 2018-04-25 221